Free Type Small Electric Steam Generator Boiler , Industrial Electric Boiler

Free Type Small Electric Steam Generator Boiler , Industrial Electric Boiler

Characteristics

Mainly for the canteen, dry cleaners, steam room, steam irons to provide the necessary dry steam, in the food factory, soybean products factory, clothing factory more commonly used. Because the water volume of the electric steam generator is designed to be less than 30L, the installation and use of the electric steam generator are not subject to the inspection and management of the technical supervision department. A boiler, as defined in the special equipment safety supervision regulations, refers to a device that USES various fuels, electricity or other energy sources to heat the contained liquid to a reasonable parameter and export the heat energy. The scope is specified as a pressurized steam boiler with a volume greater than or equal to 30L; Pressurized hot water boilers with outlet pressure greater than or equal to 0.1mpa (gauge pressure) and rated power greater than or equal to 0.1mw; Organic heat carrier boiler.

The electric steam generator adopts an automatic control device to ensure that the liquid controller or high, medium and low electrode probe rod feedback controls the opening, closing, water supply length and heating time of the water pump during operation. The high steam pressure regulated by the pressure relay decreases with the continuous output of steam. When the water level is low (mechanical) or medium (electronic), the water pump will refilled automatically. When the water level is high, the water pump will stop refilled. At the same time, the electric heat pipe in the furnace continues to heat and continuously generate steam. The pointer pressure gauge on the panel or the upper part of the top immediately shows the steam pressure value, and the whole process can be automatically displayed by the indicator light.

The normal operation parameters in the boiler are measured by various thermal monitoring instruments in various parts, and the vehicle data include pressure, temperature, flow rate, water level, current, etc. During normal operation, by monitoring the operation of these parameters, we can analyze and judge the operation condition of the passing road. When an accident occurs, we can also analyze and judge the location and nature of the accident through abnormal data changes, so as to timely deal with the accident and create conditions.